i want to wire 3 lights switched seperatly and one common exhaust fan


little miss.crazy , Friday, 13th of August 2010 03:14:33 PM

3 lights in toilet 1, toilet 2 and laundary with one common exhaust on roof 
little miss.crazy
top with duct vents comming from each area.
Thanks guys, l have done 
Registered User
it bit differently. l trie two options. both worked. one using relay for 
Joined: Saturday, 24th of April 2010, 06:09:17
trigering fan, bit expensive. second that l used is using 2 pole switch in 
Posts: 1177
stead of normal s/w and daisy chain fan switching. Regards to All
 
Viewed 16653 times
 
 
 
 

Babboonalicious , Saturday, 14th of August 2010 08:42:14 AM

try this  
Babboonalicious
hang the lights  
Registered User
you will have two wires at each one black & white  
Joined: Wednesday, 2nd of June 2010, 11:26:46
take a wire from the switch to the light wire up the WHITE to the black  
Posts: 190
at the switch box you should have one power circuit put the WHITE on one  
Viewed 16286 times
side of the switch from the light & power to the other side repeat in the  
other 2 room.if you are using one pwr source, run another wire to each of  
the rooms put the black wire on the switch, & putting the white on the  
white form light , lable that wire power on the romex cover  
Now for the fan  
Use a romex 12/3 two wire with a grd  
from toilet 1 take that romex to the toilet 2 to the switch box label  
travelers that wire this is where a 4-way switch will go blk & white in &  
second piece of romex , run it to the laundry room  
at the switch box take the two wires form the second romextravlers & wire  
the second three way here at the end those to the two brassey looking  
screw . one black & one black at the fan wire color to color black to  
black white to white  
in the laundry room take the black & wire it to the switch. take the  
white & wire it to the LIGHT WHITE wire  
in short ( hope we don;t have any ) you need to wire two wires to a 3-way  
at the first toliet & one at the end & a 4-way in the middle, & a power  
source to all three rooms.  
all with pwoer off..  
 
 
 
 
 

nina , Sunday, 15th of August 2010 12:22:04 PM

So wire the lights to one switch each and the fans to another  
nina
switch. If the fan needs to be controlled from all of those locations, you  
Registered User
will need 2 3 way switches and a 4 way and the correct wiring. If you have  
Joined: Monday, 26th of April 2010, 00:42:52
trouble understanding the wiring call a qualified professional electrician.  
Posts: 943
 
Viewed 12008 times
 
 
 
 
medifast discounts coupons
newegg ups
travelocity promo hotel code
$55 off medifast code


Who is online

Users browsing this forum: 4 guests